6-1-1 617E Liquid Flux：
Products Characteristics:
1. This product is transparent, and have a low content of rosin
2. Halogen-free, no corrosivity
3. Higher surface insulation resistance
4. To foam, and spray
5. No effect on the electrical properties of the socket surface
6. Solder joint is full and bright
7. The nozzle is never jammed
Products Instructions:
Composition：Alcohol Solvent Mixture,Interface Activator,Activation,Antioxidants,Anti-corrosive
Directions：The products are non-clean type flux, the fulx also meets the requirements of the U.S. military standard, MIL-F-14256D. This product is suitable for the wave soldering and hand soldering with lead-free solders.
617E Specification
| NO. |
Specification Item |
Specs |
| 01 |
Flux Model |
617E |
| 02 |
Flux Categopy |
RMA |
| 03 |
Chemical Classification |
Rosin |
| 04 |
Joints Color |
Colorless |
| 05 |
Solid Content |
8.0±0.5wt/% |
| 06 |
Physical State |
Liquid |
| 07 |
Color Of Liquid |
Yellow |
| 08 |
Specific Gravity(20℃) |
0.813±0.010 |
| 09 |
Boiling Point(℃) |
83.0±2.0℃ |
| 10 |
Tly of Solvent(ppm) |
400 ppm |
| 11 |
Acid Value |
30.0±5.0mg(KOH)/g |
| 12 |
Spread ratio(%) |
≥85% |
| 13 |
Halide Content |
0.045±0.010% |
| 14 |
Insulation Resistance |
≥4.0×1011Ω |
| 15 |
Corrosion Test |
Pass |
| 16 |
Applications |
Foma Spray |
| 17 |
Pre-Coating |
Prohibited |
| 18 |
Thinner Used |
ZY-900 |
617E Compositions
| Ingredients |
Contents |
Threshold Limit Value(TLV) |
Remark |
| Moldfied resin w/w |
5.8% |
- |
|
| Flux Vehicle |
0.5% |
- |
|
| Activator |
1.3% |
- |
|
| Acid Absorbent |
0.2% |
- |
|
| Anti-Oxide Agent |
0.1% |
- |
|
| Corrosion Inhibitor |
0.1% |
- |
|
| Mixed Alcohol |
92.0% |
400ppm |
|
617E Physical and Chemical Characteristics
| Appearance |
Liquid |
Odourr |
Aromatic |
| Specific Gravity (20℃) |
0.813±0.010 |
Melting Point(℃) |
--89.5 |
| Boiling Point(℃) |
83.0±2.0 |
Vapor Densitv (Air=1) |
2.0 |
| Vapor Pressure(mmhg) |
32 |
Evaporation Rate (Ether=1) |
16--20 |
617E Reactivity Data
| Stability |
stable |
| Conditions Avoid |
Keep in cool dry place avoid direct sunlight and extensive heat
|
| Incompatbility(Materials To Avoid) |
Acid Or Alkaline Solutions, Water, Grease, Inorganic Materials |
| Hazardous Decomposition Products |
Oxidant |
| Hazardous Polymerization |
Will Not Occur |
>> 1 2 >>
